ITS Transfer and Bypass Switch

  • Unavailable
its automatic transfer and bypass switch

Zener ITS automatic transfer and bypass switch
Summary
Type: Automatic Transfer and Bypass Switch
Current Range: 32 A
Input/Output: 1:1
Installation Type: Rackmount
Transfer Time: 8 to 12 ms
Features
Automatic transfer between two sources
Include maintenance bypass switch
Rackmount installation
Equipped with relay contact
With LCD display
Monitoring via network feature (1)
Originality Guarantee
Guarantee Terms
Support & Service
Estimation of required power
In general, the structure of this electric switch is similar to the ATS automatic switch, except that in this model, a manual bypass switch is provided for possible maintenance. The ITS is a power switch that supplies power to loads with two separate AC power inputs to which it is connected. In fact, the loads connected to this device are powered from two sources; These two sources can be any type of alternative power such as city electricity, diesel generators, UPS, etc. In the event of a problem with the main input power supply, such as a drop in voltage and frequency or a power outage, the system automatically supplies power to loads in the shortest possible time, without a power failure through the second input power supply. This switch time is so short that it does not cause any interruption in the operation of the loads.

Click for more inforation...

Communication module slots, an RS-232 serial port and a USB port make it possible to monitor the device with ATS Monitor monitoring software. Independent outlets with protection circuits protect other connected loads from any risk of damage in the event of a short circuit in one of the outlets. ITS has 12 IEC 320 C13 outlets and two IEC 320 C19 outlets. Also, five relay contacts and an emergency terminal are provided on the front panel of the device.

(1) Monitoring an ITS automatic switch under the TCP/IP protocol requires the provision of a SNMP Card II module.

This device is mainly used to duplicate power in data centers and computer networks. For information on the inventory and price of the ITS transfer and bypass switch, contact Zener Engineering Company sales department.
Downloads
Collapse All
Expand All
File Name Volume Update
An Adobe Acrobat file ITS persian brochure
679.49 kB
2021-01-20
Software and Accessories
ATS Monitor ATS and ITS monitoring software
ATS Monitor Soft.
ATS/ITS local monitoring software
SNMP Card II ATS and ITS monitoring module
SNMP Card II Module
ATS/ITS remote monitoring
Technical Specification
Transfer System
Model
Input Spec.
Input Voltage 200, 208, 220, 230, 240 VAC
Input Voltage Range 150 to 300 VAC
Input Frequency Range 50 or 60 Hz
Max Input Current 32 A
Inlet 2 × 30 A cable terminal
Output Spec.
Output Voltage 200, 208, 220, 230, 240 VAC
Max Outpute Current 32 A
Transfer Time typical: 8 to 12 ms
Efficiency n/a
Outlet 12 × IEC 320 C13, 2 × IEC 320 C19
Physical Spec.
Dimensions (W × D × H) 440 × 346 × 88 (2U)
Weight 8 kg
TS Environmental Conditions
Working Temperature Ambient: min -5 °C, max 40 °C
Working Humidity max 90% non-condensing
Noise Level n/a
Other Features
Protections Over-current, short-circuit
Communications RS-232, USB, 5 × dry contacts, comm, EPO, slot for communication interface
Standards Safety: IEC EN 60950-1, EMC: IEC EN 62310-2
Ask about this product

Sales and Marketing Department

Ready to register your purchase requests.
Phone Call
+9821 66 72 3972 (Ext.1)
Whatsapp
+98 919 468 3960
Email us
sales@zenerco.com
Zener engineering company (PJS), founded in 1981 is among the most experienced companies in the power and electronics field in Iran. We offer a wide range of products in the field of generating electric power including online, offline and line-interactive UPS both single and three-phase from home and office to medical and industrial applications, sealed lead acid batteries, automatic transfer switch (ATS), monitoring systems, environmental sensors and related accessories. Zener Eng. Co. provides optimal technical support in order to create the best possible customer satisfactory regarding the uninterrupted function of its equipment. This is achieved using over 60 trained personnel. Our colleagues in sales and marketing department and after sales services department are trained to give our valued customers consultation in finding the most suitable products for their need, design and execution of uninterrupted electrical systems while providing special solutions. In addition to manufacturing single and three-phase UPS, sealed lead acid batteries both with Zener brand, Zener engineering company is official and exclusive agent for Riello UPS (from Italy), Ablerex UPS (from Taiwan), Rocket and Newmax batteries (from South Korea), Interberg batteries (from Spain) and Starway batteries (from China).
All rights reserved
COPYRIGHT © 2024
Design by: Hamrad Gostar Asia Technology Development

This site uses cookies. By click on "I agree" or continuing to browse our website, you agree to our website terms and privacy policy.

Click here for more information.

I agree