EVO RT UPS

  • New
evo rt online ups, 1 to 10 kVA

Zener EVO RT online UPS
Summary
Topology: Online Double Conversion
Power Range: 1 to 10 kVA
Input/Output: 1:1
Installation Type: Desktop, Convertible
Isolation: Transformer-less
Battery: Internal or External (1)
Features
Convertible installation
0.9 output power factor
Easy installation (Plug & Play)
User friendly LCD display
Parallel function supported (2)
Monitoring via network feature (3)
Originality Guarantee
Guarantee Terms
Support & Service
Estimation of required power
EVO RT UPS is an optimized model of EVO Tower UPS for installation in a standard rack to protect network equipment and data centers. With online double conversion topology in terms of high efficiency and cost-effectiveness, it is an ideal choice for feeding and protecting a wide range of consumers, especially in the field of information technology. Thanks to the use of an inverter with an updated design and equipped with an advanced digital signal processor (DSP), consumers are fed with full sinusoidal output, stabilized voltage and frequency without the slightest interruption. The special design of this UPS with the possibility of rotating the screen, has made it possible to install it in two ways or in a standard rack (along with the equipment installed in the rack).

Click for more information...

It is also possible to place the battery inside the UPS or provide it with a high current charger up to 11.2 amps (custom equipment) to charge external batteries. The back panel slot is used to install communication modules such as the NetAgent module. The RS-232 or USB communication port (if ordered) is intended for UPS connection and UPSilon 2000 and Emily 2 monitoring software. Power 1000 has two IEC standard outputs and powers 2000 and 3000 have three IEC standard outputs, while one output socket is provided for all powers. Inputs and outputs are in terminal capacities of 6,000 and 10,000. Also at 6,000 and 10,000 capacities, an emergency cut-off terminal (EPO) is installed behind the UPS, which can be connected to the distribution board so that, if necessary, the UPS output can be cut off immediately.
(1) It is possible to provide a battery box compatible with the body of the device, if ordered.
(2) Parallel capability is available in 6 kVA and 10 kVA capacities and requires the provision of boxes and related connections for each UPS.
(3) UPS monitoring under TCP/IP protocol requires SNMP module and under Modbus/Jbus protocol requires RS-485 module.
EVO RT UPS is suitable for home, office, data center, computer networks, medical laboratory equipment, industrial plants, transportation and navigation equipment, and safety and security systems. The selling price of this UPS varies depending on the model and power requested. Please contact the sales department of Zener Engineering Company to find out the inventory, receive the price list and purchase the various capabilities of this UPS.
Downloads
Collapse All
Expand All
File Name Volume Update
An Adobe Acrobat file EVO Tower UPS persian brochure
715.68 kB
2021-01-20
Software and Accessories
NetAgent UPS monitoring software package
NetAgent Software Pack
UPS remote monitoring package
UPSilon 2000 UPS monitoring software
UPSilon 2000 Monitoring Soft.
UPS local monitoring software
Emily 2 UPS monitoring software
Emily 2 Monitoring Soft.
UPS local monitoring software
NetAgent UPS monitoring module
NetAgent Module
UPS remote monitoring
USB Card module
USB Card Module
USB port extender
2nd RS-232 card module
2nd RS-232 Card Module
Serial port extender
RS-485 card module
RS-485 Card Module
Modbus/Jbus remote monitoring
Dry Contact Card module
Dry Contact Card Module
Relay contacts
Technical Specification
UPS
UPS Model
Input Spec.
Nominal Input Voltage 220, 230, 240 VAC single phase
Input Voltage Range min 140 VAC @ 50% load, min 160 VAC @ 100% load, max 300 VAC
Input Frequency Range 50 or 60 Hz (tolerance 45 Hz to 65 Hz)
Input Power Factor > 0.99 (full linear load)
Inlet - select a model from top -
Output Spec.
Output Power - select a model from top -
Nominal Output Voltage 220, 230, 240 VAC single phase (selectable)
Output Voltage Range 220 to 240 VAC selectable
Output Frequency Range 50 or 60 Hz (tolerance ±0.1% unless synchronized to line)
Output Power Factor 0.9
Output Voltage Distortion (THDu) < 3% with linear load
Output Wave form Sinusoidal
Efficiency - select a model from top -
Outlet - select a model from top -
Battery Spec.
Type of Battery - select a model from top -
No. × Voltage - select a model from top -
Recharging Time 4 hours to 90%
Protections
Overload 100% < Load < 105% continuous, 105% < Load < 120% for 30 seconds, 120% < Load < 150% for 10 seconds
Protections Over-load, short-circuit, over-voltage, under-voltage, over-temperature, excessive low battery
Alarms Line failure, battery low, over-load, fault conditions
Physical Spec.
Dimensions (W × D × H) - select a model from top -
Weight - select a model from top -
Environmental Conditions
Working Temperature Ambient: min 0 °C, max 40 °C, Recommended for battery life: 20 to 25 °C
Working Humidity max 90% non-condensing
Altitude Level 1000 m @ nominal power (Derating 1% power for every 100 m above 1000 m, max 4000 m)
Noise Level max 50 dBA @ 1 m
Other Features
Communications Standard RS-232 or USB (optional), slot for communications interface, EPO (only on 6 and 10 kVA)
Standards EN 62040-1, EN 62040-2, EN 61000-2, EN 61000-3, EN 61000-4
Ask about this product

Sales and Marketing Department

Ready to register your purchase requests.
Phone Call
+9821 66 72 3972 (Ext.1)
Whatsapp
+98 919 468 3960
Email us
sales@zenerco.com
Zener engineering company (PJS), founded in 1981 is among the most experienced companies in the power and electronics field in Iran. We offer a wide range of products in the field of generating electric power including online, offline and line-interactive UPS both single and three-phase from home and office to medical and industrial applications, sealed lead acid batteries, automatic transfer switch (ATS), monitoring systems, environmental sensors and related accessories. Zener Eng. Co. provides optimal technical support in order to create the best possible customer satisfactory regarding the uninterrupted function of its equipment. This is achieved using over 60 trained personnel. Our colleagues in sales and marketing department and after sales services department are trained to give our valued customers consultation in finding the most suitable products for their need, design and execution of uninterrupted electrical systems while providing special solutions. In addition to manufacturing single and three-phase UPS, sealed lead acid batteries both with Zener brand, Zener engineering company is official and exclusive agent for Riello UPS (from Italy), Ablerex UPS (from Taiwan), Rocket and Newmax batteries (from South Korea), Interberg batteries (from Spain) and Starway batteries (from China).
All rights reserved
COPYRIGHT © 2024
Design by: Hamrad Gostar Asia Technology Development

This site uses cookies. By click on "I agree" or continuing to browse our website, you agree to our website terms and privacy policy.

Click here for more information.

I agree