iDialog UPS

  • Unavailable
idialog offline ups, 400 to 1600 VA

Zener iDialog offline UPS
Summary
Topology: Offline
Power Range: 400 to 1600 VA
Input/Output: 1:1
Installation Type: Desktop
Isolation: Transformer-less
Battery: Only Internal
Features
Small and ergonomic design
Completely silent operation (0 dBA noise)
Ideal for home and office consumers
Easy installation (Plug & Play)
Auto start after mains return
Easy battery replacement
Originality Guarantee
Guarantee Terms
Support & Service
Estimation of required power
IDialog UPS with Offline topology is a good option for feeding and protecting office and home consumers. The special fanless design of this UPS has resulted in its completely silent performance. At 400, 600 and 800 volts, four output sockets with a USB port are provided for communication with the PowerShield3 monitoring software. At 1200 and 1600 volts, in addition to four output sockets and a USB port, there are two sockets that only protect against power fluctuations and an RS-232 serial port for connecting UPS to PowerShield3 software; This software can be used to monitor the UPS and send the automatic shutdown command to the local computer connected to the UPS.

Click for more information...

The energy required by the consumers connected to this UPS in the absence of power is provided by converting the energy stored in its internal battery. The internal battery can be easily replaced and replaced. Installation and commissioning of this UPS does not require much technical knowledge and the end user can start the UPS using the guide in the package.
Zener UPS iDialog Zener UPS iDialog rear view
IDialog UPS is suitable for home and office use. The selling price of this UPS varies depending on the model and power requested. Please contact the sales department of Zener Engineering Company to find out the inventory, receive the price list and purchase the various capabilities of this UPS.
Downloads
Collapse All
Expand All
File Name Volume Update
An Adobe Acrobat file iDialog UPS english user manual
113.29 kB
2021-01-20
An Adobe Acrobat file iDialog UPS persian brochure
729.47 kB
2021-01-20
Software and Accessories
PowerShield3 UPS and ATS monitoring software
PowerShield3 Monitoring Soft.
UPS/ATS monitoring software
Technical Specification
UPS
UPS Model
Input Spec.
Nominal Input Voltage 220, 230, 240 VAC single phase
Input Voltage Range 230 VAC -25% to +20%
Input Frequency Range 50 or 60 Hz with automatic selection
Inlet 1 ‍‍× IEC 320 C14
Output Spec.
Output Power - select a model from top -
Nominal Output Voltage 230 VAC single phase
Output Voltage Range AC mode: 230 VAC -20% to +25%, Inverter mode: 230 VAC ±10%
Output Frequency Range Inverter mode: 50 or 60 Hz (tolerance ±1%)
Output Wave form Pseudo sinusoidal
Transfer Time 2 to 6 ms typical
Outlet - select a model from top -
Battery Spec.
Type of Battery Only internal battery
No. × Voltage n/a
Recharging Time 6 to 8 hours
Protections
Overload AC mode: Load > 110% automatic shutdown after 5 minutes, Load > 120% shuts down immediately
Inverter mode: Load > 110% automatic shutdown after 5 seconds, Load > 120% shuts down immediately
Protections Excessive low battery, over-voltage, short-circuit
Alarms Line failure, battery low, over-load, fault conditions
Physical Spec.
Dimensions (W × D × H) - select a model from top -
Weight - select a model from top -
Environmental Conditions
Working Temperature Ambient: min 0 °C, max 40 °C, Recommended for battery life: 20 to 25 °C
Working Humidity max 95% non-condensing
Altitude Level 1000 m @ nominal power (Derating 1% power for every 100 m above 1000 m, max 6000 m)
Noise Level 0 dBA @ 1 m
Other Features
Communications - select a model from top -
Standards European directives: L V 2014/35/EU low voltage Directive; EMC 2014/30/EU electromagnetic compatibility, Directive Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant
Ask about this product

Sales and Marketing Department

Ready to register your purchase requests.
Phone Call
+9821 66 72 3972 (Ext.1)
Whatsapp
+98 919 468 3960
Email us
sales@zenerco.com
Zener engineering company (PJS), founded in 1981 is among the most experienced companies in the power and electronics field in Iran. We offer a wide range of products in the field of generating electric power including online, offline and line-interactive UPS both single and three-phase from home and office to medical and industrial applications, sealed lead acid batteries, automatic transfer switch (ATS), monitoring systems, environmental sensors and related accessories. Zener Eng. Co. provides optimal technical support in order to create the best possible customer satisfactory regarding the uninterrupted function of its equipment. This is achieved using over 60 trained personnel. Our colleagues in sales and marketing department and after sales services department are trained to give our valued customers consultation in finding the most suitable products for their need, design and execution of uninterrupted electrical systems while providing special solutions. In addition to manufacturing single and three-phase UPS, sealed lead acid batteries both with Zener brand, Zener engineering company is official and exclusive agent for Riello UPS (from Italy), Ablerex UPS (from Taiwan), Rocket and Newmax batteries (from South Korea), Interberg batteries (from Spain) and Starway batteries (from China).
All rights reserved
COPYRIGHT © 2024
Design by: Hamrad Gostar Asia Technology Development

This site uses cookies. By click on "I agree" or continuing to browse our website, you agree to our website terms and privacy policy.

Click here for more information.

I agree