Mars II Tower UPS

  • Popular
mars ii tower online ups, 4.5 to 20 kVA

Topology: Online Double Conversion
Power Range: 4.5 to 20 kVA
Input/Output: 1:1 3:1
Installation Type: Tower
Isolation: UPS + Isolation transformer (1)
Battery: Internal or External (2)
Wide input voltage and frequency
0.9 output power factor
Dual input capabilty (3)
Up to 4 UPS in parallel function
With LCD display
Monitoring via network feature (4)
The Mars II Tower UPS with Online topology provides high-reliability protection for sensitive consumers. The feature of power expansion or increase of system reliability (Redundancy) by parallelizing up to 4 UPS devices is easily available without additional equipment for this model. It is also possible to place the battery inside the UPS (up to 10kVA) or provide it with a high current charger (custom equipment) to charge external batteries. The back panel slot is used to install communication modules such as the NetAgent module. The RS-232 or USB communication port (if ordered) is intended for UPS connection and UPSilon 2000 and Emily 2 monitoring software. An emergency shut-off terminal (EPO) is installed on the back of the UPS that can be connected to the switchboard to cut off the UPS output immediately if necessary.

Click for more information...

A manual bypass switch (Maintenance Bypass) is provided for uninterrupted transfer of power supply from the inverter to the main input power for possible services in this UPS. Dual input system is provided by default for 6 kVA and 10 kVA capacities and 15 kVA and 20 kVA by default.
Zener UPS Mars II Tower dual input system diagram Zener UPS Mars II Tower single input system diagram
(1) It is possible to use the isolated output transformer inside the UPS for 6 kVA and 10 kVA capacities as custom equipment.
(2) It is possible to provide a battery box compatible with the body of the device, if ordered.
(3) Dual input system is provided by default for 6 kVA and 10 kVA capacities and 15 kVA and 20 kVA by default.
(4) UPS monitoring under TCP/IP protocol requires SNMP module and under Modbus/Jbus protocol requires RS-485 module.
Mars II Tower UPS is suitable for home, office, data center, computer networks, laboratory medical equipment, transportation and navigation equipment, industrial plants, safety and security systems. The selling price of this UPS varies depending on the model and power requested. Please contact the sales department of Zener Engineering Company to find out the inventory, receive the price list and purchase the various capabilities of this UPS.
Collapse All
Expand All
File Name Volume Update
An Adobe Acrobat file Mars II Tower UPS persian brochure
675.43 kB
An Adobe Acrobat file Mars II Tower, RT 6, 10 kVA UPS quick start guide
766.64 kB
Software and Accesories
UPS remote monitoring package
UPS local monitoring software
UPS local monitoring software
UPS remote monitoring
USB port extender
Serial port extender
Modbus/Jbus remote monitoring
Technical Specification
UPS Model
Input Spec.
Nominal Input Voltage - select a model from top -
Input Voltage Range - select a model from top -
Input Frequency Range 50 or 60 Hz (tolerance 45 Hz to 65 Hz)
Input Power Factor > 0.99 (full linear load)
Inlet Terminal block
Output Spec.
Output Power - select a model from top -
Nominal Output Voltage 230 VAC single phase
Output Voltage Range 200, 208, 220, 230, 240 VAC selectable
Output Frequency Range 50 or 60 Hz (tolerance ±1 Hz or ±3 Hz selectable)
Output Power Factor 0.9
Output Voltage Distortion (THDu) < 3% with linear load
Output Wave form Sinusoidal
Efficiency - select a model from top -
Outlet Terminal block
Battery Spec.
Type of Battery - select a model from top -
No. × Voltage 20 × 12 VDC = 240 VDC
Recharging Time - select a model from top -
Overload Inverter supply: 105% < Load < 150% for 160 seconds, Bypass supply: 105% < Load < 200% for 500 seconds
Protections Over-load, short-circuit, over-voltage, under-voltage, over-temperature, excessive low battery
Alarms Line failure, battery low, over-load, fault conditions
Physical Spec.
Dimensions (W × D × H) - select a model from top -
Weight - select a model from top -
Environmental Conditions
Working Temperature Ambient: min 0 °C, max 40 °C, Recommended for battery life: 20 to 25 °C
Working Humidity max 90% non-condensing
Altitude Level 1000 m @ nominal power (Derating 1% power for every 100 m above 1000 m, max 4000 m)
Noise Level - select a model from top -
Other Features
Communications Standard RS-232 or USB (optional), slot for communications interface, EPO
Standards - select a model from top -
Ask about this product

Sales and Marketing Department

Ready to register your purchase requests.
+98 919 468 3960
Zener engineering company (PJS), founded in 1981 is among the most experienced companies in the power and electronics field in Iran. We offer a wide range of products in the field of generating electric power including online, offline and line-interactive UPS both single and three-phase from home and office to medical and industrial applications, sealed lead acid batteries, automatic transfer switch (ATS), monitoring systems, environmental sensors and related accessories. Zener Eng. Co. provides optimal technical support in order to create the best possible customer satisfactory regarding the uninterrupted function of its equipment. This is achieved using over 60 trained personnel. Our colleagues in sales and marketing department and after sales services department are trained to give our valued customers consultation in finding the most suitable products for their need, design and execution of uninterrupted electrical systems while providing special solutions. In addition to manufacturing single and three-phase UPS, sealed lead acid batteries both with Zener brand, Zener engineering company is official and exclusive agent for Riello UPS (from Italy), Ablerex UPS (from Taiwan), Rocket and Newmax batteries (from South Korea), Interberg batteries (from Spain) and Starway batteries (from China).
All rights reserved
Design by: Hamrad Gostar Asia Technology Development