Master FC400 UPS

  • Unavailable
master fc400 online ups, 30 to 125 kVA

Topology: Online Double Conversion
Power Range: 30 to 125 kVA
Input/Output: 3:3
Installation Type: Tower
Isolation: Transformer-less
Battery: Only External (1)
50 or 60 Hz to 400 Hz freq. converter
With output isolation transformer
Ideal for navi and military applications
Small footprint
Up to 8 UPS with parallel function (2)
Monitoring via network feature (3)
Master FC400 UPS with Online topology with special function is available as a frequency converter of 50 or 60 Hz to 400 Hz in the capacities of 30 to 125 kVA. The design of this UPS is in accordance with IEC EN 62040-3 and VFI-SS-111 standards and is equipped with an isolated transformer at the output. The input of this UPS is three-phase and its output is 208 volts single phase (adjustable from 200 to 215 volts), which makes it suitable for use in navigation equipment in airports, military centers, naval centers, etc. This UPS requires little space to install; At 125 kVA, it occupies an area of 0.86 square meters. The fans installed in the upper part of the device practically eliminate the need for lateral or back access to the UPS and allow the UPS to be placed near the wall.

Click for more information...

It is possible to order the device with harmonic filters to eliminate annoying frequencies at the UPS input (harmonics 5 and 11); This feature is included in the technical specifications table under the title HC Version. Except for 30kVA power, other powers can be provided with 12-pulse rectifier; This feature is included in the technical specifications table under the heading 12P. The feature of power expansion or increase of system reliability (Redundancy) is available by parallelizing up to 8 UPS devices. The user-friendly LCD display displays the values of the various parameters of the device well. With RS-232 serial port, remote emergency terminal (EPO) and two slots for communication equipment such as NetMan 204 module, parallel card slot, Multi I / O card slot and relay contacts, any possible connection to this UP S is well predicted. The Maintenance Bypass switch is located in this UPS to transfer the power supply of consumers from the inverter to the main input power without any interruption. This UPS comes with IP20 protection by default; It is possible to increase the permeability coefficient to IP31 and IP42 if ordered.
(1) It is possible to order a battery box compatible with the body of the device.
(2) In order to perform the Parallel operation, a parallel card with the corresponding connections must be provided for each UPS.
(3) UPS monitoring under TCP/IP protocol requires NetMan 204 module and under Modbus/Jbus protocol requires MultiCOM 302 module.
Master FC400 UPS is suitable for use in transportation and navigation equipment. The selling price of this UPS varies depending on the model and power requested. Please contact the sales department of Zener Engineering Company to find out the inventory, receive the price list and purchase the various capabilities of this UPS.
Collapse All
Expand All
File Name Volume Update
An Adobe Acrobat file Master FC400 UPS persian brochure
149.98 kB
Software and Accessories
UPS/ATS monitoring software
UPS remote monitoring software
UPS/ATS remote monitoring
Modbus/Jbus protocol converter
Serial port extender
Relay contacts, protocol converter
Profibus remote monitoring
Remote monitoring display
Environmental sensor
Parallel kit
Isolation transformer
Technical Specification
UPS Model
Input Spec.
Nominal Input Voltage 380, 400, 415 VAC three phase
Input Voltage Range 400 VAC ±20% @ full load
Input Frequency Range 45 to 65 Hz
Input Power Factor - select a model from top -
Input Voltage Distortion (THDi) - select a model from top -
Inlet Terminal block
Output Spec.
Output Power - select a model from top -
Nominal Output Voltage 208 VAC three phase
Output Voltage Range Static variation ±1%, Dynamic variation ±3%
Output Frequency Range 400 Hz
Output Power Factor 0.8
Output Voltage Distortion (THDu) ≤ 3% with linear load, ≤ 4% with non-linear load
Output Wave form Sinusoidal
Efficiency up to 92%
Outlet Terminal block
Overload 100% < Load < 110% for 60 minutes, 110% < Load < 125% for 10 minutes , 125% < Load < 150% for 1 minute
Protections Over-current, short-circuit, over-voltage, under-voltage, over-temperature, excessive low battery
Alarms Line failure, battery low, over-load, fault conditions
Physical Spec.
Dimensions (W × D × H) - select a model from top -
Weight - select a model from top -
Environmental Conditions
Working Temperature Ambient: min 0 °C, max 40 °C, Recommended for battery life: 20 to 25 °C
Working Humidity max 95% non-condensing
Altitude Level 1000 m @ nominal power (Derating 1% power for every 100 m above 1000 m, max 6000 m)
Noise Level - select a model from top -
Other Features
Communications Double RS-232 + dry contacts + 2 slots for communications interface
Standards European directives: L V 2014/35/EU low voltage Directive EMC 2014/30/EU electromagnetic compatibility Directive Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant Classification in accordance with IEC 62040-3 (Voltage frequency Independent) VFI - SS - 111
Ask about this product

Sales and Marketing Department

Ready to register your purchase requests.
+98 919 468 3960
Zener engineering company (PJS), founded in 1981 is among the most experienced companies in the power and electronics field in Iran. We offer a wide range of products in the field of generating electric power including online, offline and line-interactive UPS both single and three-phase from home and office to medical and industrial applications, sealed lead acid batteries, automatic transfer switch (ATS), monitoring systems, environmental sensors and related accessories. Zener Eng. Co. provides optimal technical support in order to create the best possible customer satisfactory regarding the uninterrupted function of its equipment. This is achieved using over 60 trained personnel. Our colleagues in sales and marketing department and after sales services department are trained to give our valued customers consultation in finding the most suitable products for their need, design and execution of uninterrupted electrical systems while providing special solutions. In addition to manufacturing single and three-phase UPS, sealed lead acid batteries both with Zener brand, Zener engineering company is official and exclusive agent for Riello UPS (from Italy), Ablerex UPS (from Taiwan), Rocket and Newmax batteries (from South Korea), Interberg batteries (from Spain) and Starway batteries (from China).
All rights reserved
Design by: Hamrad Gostar Asia Technology Development