Vision UPS

  • Unavailable
vision line-interactive ups, 800 to 2000 VA

Summary
Topology: Line-interactive
Power Range: 800 to 2000 VA
Input/Output: 1:1
Installation type: Desktop
Isolation: Transformer-less
Battery: Only Internal
Features
Automatic voltage stabilizer (AVR)
User friendly LCD display
Easy installation (Plug & Play)
Programmable outlets
Easy hot-swap internal battery replacement
Monitoring via network feature (1)
Vision UPS is a Line-interactive UPS with AVR with fully sinusoidal output. The EMI and RFI filters in this UPS protect the connected consumers well from input power fluctuations. The slots on the back panel are used to connect communication modules, including the NetMan 204 module. There is also a USB port and an RS-232 port for connecting UPS to PowerShield3 monitoring software. This software can be used to monitor the UPS and the automatic shutdown command of the computer (network computers) connected to it. Thanks to the use of Hot-swap technology in this UPS, the replacement and replacement of internal batteries can be done without the need for blackouts or interruptions in consumer power supply.

Click for more information...

At 800 and 1100 capacities there are three IEC standard outputs and at 1500 and 2000 capacities there are five IEC standard outputs; In addition, all models of this UPS have a programmable EnergyShare output that can be programmed to automatically turn on or off connected consumers in certain situations.
(1) UPS monitoring under TCP/IP protocol requires NetMan 204 module and under Modbus/Jbus protocol requires MultiCOM 302 module.
Zener UPS Vision 1500 and 2000 VA rear panel Zener UPS Vision 800 and 1100 VA rear panel
Vision UPS is suitable for home and office use. The selling price of this UPS varies depending on the model and power requested. Please contact the sales department of Zener Engineering Company to find out the inventory, receive the price list and purchase the various capabilities of this UPS.
Downloads
Collapse All
Expand All
File Name Volume Update
An Adobe Acrobat file Vision UPS persian brochure
758.29 kB
2021-01-20
Software and Accessories
UPS/ATS monitoring software
UPS remote monitoring software
UPS/ATS remote monitoring
Modbus/Jbus protocol converter
Serial port extender
Contact, serial port extender
Relay contacts
Relay contacts, protocol converter
Profibus remote monitoring
Remote monitoring display
Environmental sensor
Technical Specification
UPS
UPS Model
Input Spec.
Nominal Input Voltage 220, 230, 240 VAC single phase
Input Voltage Range 162 to 290 VAC
Input Frequency Range 50 or 60 Hz with automatic selection (tolerance ±5%)
Inlet 1 × IEC 320 C14
Output Spec.
Output Power - select a model from top -
Nominal Output Voltage 220, 230, 240 VAC single phase
Output Voltage Range 220 to 240 VAC selectable in 1 V steps
Output Frequency Range 50 or 60 Hz with automatic selection
Output Wave form Sinusoidal
Transfer Time 2 to 6 ms typical
Outlet - select a model from top -
Battery Spec.
Type of Battery Only internal battery
No. × Voltage - select a model from top -
Recharging Time 4 to 6 hours
Protections
Overload AC mode: Load > 150% locked after 1 second, 110% < Load < 150% locked after 10 seconds, 100% < Load < 110% locked after 5 minutes
Inverter mode: Load > 150% locked after 0.5 second, 110% < Load < 150% locked after 5 second, 100% < Load < 110% locked after 60 seconds
Protections Over-load, short-circuit, over-voltage, under-voltage, over-temperature, excessive low battery
Alarms Line failure, battery low, over-load, fault conditions
Physical Spec.
Dimensions (W × D × H) - select a model from top -
Weight - select a model from top -
Environmental Conditions
Working Temperature Ambient: min 0 °C, max 40 °C, Recommended for battery life: 20 to 25 °C
Working Humidity max 95% non-condensing
Altitude Level 1000 m @ nominal power (Derating 1% power for every 100 m above 1000 m, max 6000 m)
Noise Level max 40 dBA @ 1 m
Other Features
Communications USB, RS-232, slot for communications interface
Standards European directives: L V 2014/35/EU low voltage Directive EMC 2014/30/EU electromagnetic compatibility
Directive Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant
Ask about this product

Sales and Marketing Department

Ready to register your purchase requests.
Whatsapp
+98 919 468 3960
Zener engineering company (PJS), founded in 1981 is among the most experienced companies in the power and electronics field in Iran. We offer a wide range of products in the field of generating electric power including online, offline and line-interactive UPS both single and three-phase from home and office to medical and industrial applications, sealed lead acid batteries, automatic transfer switch (ATS), monitoring systems, environmental sensors and related accessories. Zener Eng. Co. provides optimal technical support in order to create the best possible customer satisfactory regarding the uninterrupted function of its equipment. This is achieved using over 60 trained personnel. Our colleagues in sales and marketing department and after sales services department are trained to give our valued customers consultation in finding the most suitable products for their need, design and execution of uninterrupted electrical systems while providing special solutions. In addition to manufacturing single and three-phase UPS, sealed lead acid batteries both with Zener brand, Zener engineering company is official and exclusive agent for Riello UPS (from Italy), Ablerex UPS (from Taiwan), Rocket and Newmax batteries (from South Korea), Interberg batteries (from Spain) and Starway batteries (from China).
All rights reserved
COPYRIGHT © 2022
Design by: Hamrad Gostar Asia Technology Development