English
Persian 
Sales and Marketing Department
Ready to register your purchase requests.
Summary
| Topology: | Online Double Conversion | |
| Power Range: | 1000 to 3000 VA | |
| Input/Output: | 1:1 | |
| Installation Type: | Desktop, Tower | |
| Isolation: | Transformer-less | |
| Battery | Internal or External |
Features
Wide input voltage and frequency range
Digital fan speed controller
Easy installation (Plug & Play)
Programmable outlets
Optional LCD display
Monitoring via network feature (1)
Zener Tower UPS with Online topology provides high-reliability protection for sensitive consumers. The inverter, equipped with intelligent microprocessor control, provides uninterruptible power supply to consumers with full sinusoidal output and stabilized voltage and frequency. It is also possible to place the battery inside the UPS or provide it with a high current charger up to 11.2 amps (custom equipment) to charge external batteries. The slots on the back panel are used to install communication modules such as the NetAgent module. The RS-232 or USB communication port (if ordered) is intended for UPS connection and UPSilon 2000 and Emily 2 monitoring software. The use of a digital fan speed controller increases the fan speed if the load increases and vice versa, leading to a reduction in circuit losses and the noise produced.
Click for more information...
Power 1000 has three IEC standard outputs and one output socket, power 2000 has three IEC standard outputs and two output sockets and power 3000 has six IEC standard outputs and two output sockets, while two IEC outputs per power, It can be programmed independently, which can automatically turn on or off the consumers connected to them in special situations, such as disconnection or connection of input power, overload, low battery voltage, etc. UPS comes with LED display by default, but it is possible to provide it with LCD display as custom equipment. An emergency shut-off terminal (EPO) is installed on the back of the UPS that can be connected to the distribution board to immediately cut off the UPS output if necessary.
(1) UPS monitoring under TCP/IP protocol requires SNMP module and under Modbus/Jbus protocol requires RS-485 module.
Downloads
| File Name | Volume | Update |
|---|---|---|
 Zener Tower UPS persian brochure |
730.96 kB | 2021-01-20 |