Multi Power UPS

multi power online modular ups, 15 to 294 kW

Topology: Online Double Conversion
Power Range: 15 to 294 kW
Input/Output: 3:3
Installation Type: Tower, Modular
Isolation: Transformer-less
Battery: Modular Cabinet
Up to 1 MW with parallel function
Unity input and output power factor
Small footprint
Efficiency up to 96.5% in online mode
Color and touch LCD display
Monitoring via network feature
Multi Power UPS with Online topology is a modular UPS with an extraordinary power range including 15, 25 and 42 kW power modules (optional) with Hot-swap connectivity. By parallelizing 28 power modules, the total power of the system increases to more than one megawatt. The modular feature allows the user to easily increase the final capacity of their system in proportion to the increase in load, in case of increasing consumers and the need for more power, by spending less money instead of buying another UPS device, simply by providing more modules. , Upgrade. The power factor of one at the input and output determines the high ability of the UPS to power all types of consumers (ohmic loads, inductors and capacitors) to the same extent. This UPS is generally divided into two parts: cabinets and modules that can be installed inside it.

Click for more information...

Modules that can be installed are:
Power Module
Zener UPS Multi Power Power Module
(Power Module)
Bypass Module
Zener UPS Multi Power Bypass Module
(Bypass Module)
Connectivity Panel
Zener UPS Multi Power Connectivity Panel
(Connectivity Panel)
Battery Unit
Zener UPS Multi Power Battery Unit
(Battery Unit)
Depending on how these modules are placed inside the cabinet, this set of UPS with batteries can be provided in the following forms:
1- MPX Power Cabinet 130 PWC: It has 5 power modules (15 or 25 kW), a bypass module and a communication panel
2- MPW Power Cabinet 300 PWC: includes 7 42 kW power modules, a bypass module and a communication panel
3- MPX Combo Cabinet 100 CBC: It has 4 power modules (15 or 25 kW), 6 battery units, a bypass module and a communication panel
4- MPW Combo Cabinet 130 CBC: including 3 42 kW power modules, 5 battery units, a bypass module and a communication panel
5- MPW Battery Cabinet 170 BTC: It has 9 battery units with monitoring unit and battery switch
Installing this UPS requires little space; MPW Power Cabinet 300 PWC with seven 42 kW modules (294 kW in a 42-unit rack) and MPW Combo Cabinet 130 CBC with three 42 kW modules (126 kW in a 42-unit rack) with 5 battery units (200 × 9 AH battery) need a little more than half a square meter of space for installation. An Auxiliary Signal Board is installed on the back panel of the device, which connects the device to connect the device to the switches on the electrical panel to send commands such as disconnecting and reconnecting the main input, disconnecting and reconnecting bypasses, disconnecting and reconnecting the battery, etc. Makes available. On the communication panel, there is a color LCD display with Touch Screen capability, two slots for installing communication equipment, two power supply units, a monitoring unit and an RJ45 network socket. Monitoring of this UPS under TCP/IP protocol can be done by default and without providing any additional equipment. This UPS comes with IP20 protection by default; It is possible to increase the permeability coefficient to IP21 if ordered.
Multi Power UPS is suitable for use in data centers, computer networks and transport and navigation equipment. The selling price of this UPS varies depending on the model and power requested. Please contact the sales department of Zener Engineering Company to find out the inventory, receive the price list and purchase the various capabilities of this UPS.
Collapse All
Expand All
File Name Volume Update
An Adobe Acrobat file Multi Power UPS persian brochure
861.08 kB
Software and Accessories
UPS/ATS monitoring software
UPS remote monitoring software
UPS/ATS remote monitoring
Modbus/Jbus protocol converter
Serial port extender
Contact, serial port extender
Relay contacts
Relay contacts, protocol converter
Profibus remote monitoring
Remote monitoring display
Environmental sensor
Technical Specification
UPS Model
Input Spec.
Nominal Input Voltage 380, 400, 415 VAC three phase
Input Voltage Range 400 VAC ±20% @ full load
Input Frequency Range 50 or 60 Hz (tolerance 40 to 72 Hz)
Input Power Factor 1
Input Voltage Distortion (THDi) < 3%
Inlet Terminal block
Bypass Spec.
Bypass Voltage Range 380, 400, 415 VAC three phase
Bypass Frequency Range 50 or 60 Hz (tolerance ±5% selectable)
Output Spec.
Output Power - select a model from top -
Nominal Output Voltage 380, 400, 415 VAC single phase (selectable)
Output Voltage Range 380 to 415 VAC, Static variation ±0.5%, Dynamic variation EN62040-3 class performance 1 non-linear load
Output Frequency Range 50 or 60 Hz selectable
Output Power Factor 1
Output Voltage Distortion (THDu) < 1.5% with linear load, < 2.5% with non-linear load
Output Wave form Sinusoidal
Efficiency up to 99% in ECO mode
Outlet Terminal block
Battery Spec.
Type of Battery
Conventional Type
Free Standing Battery Box / Shelf
1 × (20 + 20) Blocks
860 × 800 × 2000 mm
250 kg
Modular Type (BTC)
Modular type by Battery Unit
9 × Battery Shelves = 9 × (4 × BU)
600 × 1050 × 2000 mm
280 kg
Overload 100% < Load < 125% for 10 minutes, 125% < Load < 150% for 1 minute
Protections Over-current, short-circuit, over-voltage, under-voltage, over-temperature, excessive low battery
Alarms Line failure, battery low, over-load, fault conditions
Physical Spec.
Dimensions (W × D × H) - select a model from top -
Weight - select a model from top -
Environmental Conditions
Working Temperature Ambient: min 0 °C, max 40 °C, Recommended for battery life: 20 to 25 °C
Working Humidity max 95% non-condensing
Altitude Level 1000 m @ nominal power (Derating 1% power for every 100 m above 1000 m, max 6000 m)
Noise Level - select a model from top -
Other Features
Communications DB9 with RS-232, 2 slots for communications interface, REPO, dry contacts
Standards European directives: L V 2014/35/EU low voltage Directive EMC 2014/30/EU electromagnetic compatibility Directive Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2 - category C2; RoHS compliant Classification in accordance with IEC 62040-3 (Voltage frequency Independent) VFI - SS - 111
Ask about this product

Sales and Marketing Department

Ready to register your purchase requests.
+98 919 468 3960
Zener engineering company (PJS), founded in 1981 is among the most experienced companies in the power and electronics field in Iran. We offer a wide range of products in the field of generating electric power including online, offline and line-interactive UPS both single and three-phase from home and office to medical and industrial applications, sealed lead acid batteries, automatic transfer switch (ATS), monitoring systems, environmental sensors and related accessories. Zener Eng. Co. provides optimal technical support in order to create the best possible customer satisfactory regarding the uninterrupted function of its equipment. This is achieved using over 60 trained personnel. Our colleagues in sales and marketing department and after sales services department are trained to give our valued customers consultation in finding the most suitable products for their need, design and execution of uninterrupted electrical systems while providing special solutions. In addition to manufacturing single and three-phase UPS, sealed lead acid batteries both with Zener brand, Zener engineering company is official and exclusive agent for Riello UPS (from Italy), Ablerex UPS (from Taiwan), Rocket and Newmax batteries (from South Korea), Interberg batteries (from Spain) and Starway batteries (from China).
All rights reserved
Design by: Hamrad Gostar Asia Technology Development