Next Energy UPS

  • Soon
next energy online ups, 250 to 800 kVA

Summary
Topology: Online Double Conversion
Power Range: 250 to 600 kVA
Input/Output: 3:3
Installation Type: Tower
Isolation: Transformer-less (1)
Battery: Only External (2)
Features
Unity output power factor
Color and touch LCD display
Efficiency up to 97% in online mode
Up to 8 UPS with parallel function (3)
Small footprint
Monitoring via network feature (4)
Next Energy UPS with Online topology equipped with IGBT-based three-level inverter designed with the latest technology in the world in accordance with IEC 62040-3 and VFI SS 111 High efficiency at a reasonable cost for sensitive consumers in data centers, computer networks And ... offers. The issue of minimum energy loss and high efficiency has been especially considered in the design of this UPS. The efficiency in Online mode is 97%, in ECO mode it is 98.5% and in Smart Active mode it is 99%. The output power factor of this UPS is one; This feature makes it possible to power a variety of consumers (ohmic, inductive and capacitive loads) to a certain extent.

Click for more information...

The seven-inch color LCD display with Touch screen capability displays the values of various parameters of the device well. Access to various settings and technical parameters of the device is possible using the front panel display of the device, in three levels of security protected by a password. This UPS is compatible with all types of diesel generators and synchronizes well; In addition, it protects the consumer from any kind of noise that may be caused by the use of diesel generators. The effectiveness of input power (whether mains electricity or diesel generators) in terms of power supply to consumers by UPS is zero. The feature of power expansion or increase of system reliability (Redundancy) is available by parallelizing up to 8 UPS devices with the possibility of using shared batteries. This UPS can also be used without a null connection; Eliminating null connections in modern data centers reduces the cost of the distribution network. Next Energy takes up as little space as possible; 250 kVA power requires 0.68 square meters of space for installation. In Smart Active mode, by monitoring the quality of voltage and input frequency, it automatically decides on the power supply of connected consumers through the inverter or bypass path, and this, the overall efficiency of the system up to 99% in this working state Increasing. With a serial USB port, remote emergency terminal (EPO) and two slots for communication equipment such as the NetMan 204 module and relay contacts, any possible connection to this UPS is well anticipated. This UPS comes with IP20 protection by default; It is possible to increase the permeability coefficient to IP31 and IP42 if ordered.
Zener UPS Next Energy LCD display
(1) It is possible to provide an output transformer in the box in harmony with the body of the device, if ordered.
(2) It is possible to provide a battery box compatible with the body of the device, if ordered.
(3) To perform the parallel operation, the Parallel kit must be provided with the relevant connections for each UPS.
(4) UPS monitoring under TCP/IP protocol requires NetMan 204 module and under Modbus/Jbus protocol requires MultiCOM 302 module.
Next Energy UPS is suitable for use in data centers, computer networks, laboratory medical equipment, transportation and navigation equipment, industrial plants and safety and security systems. The selling price of this UPS varies depending on the model and power requested. Please contact the sales department of Zener Engineering Company to find out the inventory, receive the price list and purchase the various capabilities of this UPS.
Downloads
Collapse All
Expand All
File Name Volume Update
An Adobe Acrobat file Next Energy UPS persian brochure
898.51 kB
2021-11-02
Software and Accessories
UPS/ATS monitoring software
UPS remote monitoring software
UPS/ATS remote monitoring
Modbus/Jbus protocol converter
Serial port extender
Relay contacts, protocol converter
Profibus remote monitoring
Remote monitoring display
Environmental sensor
Parallel kit
Isolation transformer
Technical Specification
UPS
UPS Model
Input Spec.
Nominal Input Voltage 380, 400, 415 VAC three phase
Input Voltage Range 400 VAC ±20% @ full load
Input Frequency Range 45 to 65 Hz
Input Power Factor 0.99
Input Voltage Distortion (THDi) < 3%
Inlet Terminal block
Bypass Spec.
Bypass Voltage Range 380, 400, 415 VAC three phase with neutral
Bypass Frequency Range 50 or 60 Hz (tolerance ±2% selectable from ±1% to ±5%)
Output Spec.
Output Power - select a model from top -
Nominal Output Voltage 380, 400, 415 VAC three phase with neutral (selectable)
Output Voltage Range Static variation: ±1%, Dynamic variation: ±5% in 10 ms
Output Frequency Range 50 or 60 Hz selectable (tolerance ±0.05%)
Output Power Factor 1
Output Voltage Distortion (THDu) < 1% with linear load, < 3% with non-linear load
Output Wave form Sinusoidal
Efficiency up to 97% in Online mode
Outlet Terminal block
Battery Spec.
Type of Battery Only external batteries
No. × Voltage 40 ‍× 12 VDC = 480 VDC
Protections
Overload - select a model from top -
Protections Over-current, short-circuit, over-voltage, under-voltage, over-temperature, excessive low battery
Alarms Line failure, battery low, over-load, fault conditions
Physical Spec.
Dimensions (W × D × H) - select a model from top -
Weight - select a model from top -
Environmental Conditions
Working Temperature Ambient: min 0 °C, max 40 °C, Recommended for battery life: 20 to 25 °C
Working Humidity max 95% non-condensing
Altitude Level 1000 m @ nominal power (Derating 1% power for every 100 m above 1000 m, max 6000 m)
Noise Level max 70 dBA @ 1 m
Other Features
Communications USB, Dry contacts, 2 slots for communications interface
Standards European directives: L V 2014/35/EU low voltage Directive EMC 2014/30/EU electromagnetic compatibility Directive Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant Classification in accordance with IEC 62040-3 (Voltage frequency Independent) VFI - SS - 111
Ask about this product

Sales and Marketing Department

Ready to register your purchase requests.
Whatsapp
+98 919 468 3960
Zener engineering company (PJS), founded in 1981 is among the most experienced companies in the power and electronics field in Iran. We offer a wide range of products in the field of generating electric power including online, offline and line-interactive UPS both single and three-phase from home and office to medical and industrial applications, sealed lead acid batteries, automatic transfer switch (ATS), monitoring systems, environmental sensors and related accessories. Zener Eng. Co. provides optimal technical support in order to create the best possible customer satisfactory regarding the uninterrupted function of its equipment. This is achieved using over 60 trained personnel. Our colleagues in sales and marketing department and after sales services department are trained to give our valued customers consultation in finding the most suitable products for their need, design and execution of uninterrupted electrical systems while providing special solutions. In addition to manufacturing single and three-phase UPS, sealed lead acid batteries both with Zener brand, Zener engineering company is official and exclusive agent for Riello UPS (from Italy), Ablerex UPS (from Taiwan), Rocket and Newmax batteries (from South Korea), Interberg batteries (from Spain) and Starway batteries (from China).
All rights reserved
COPYRIGHT © 2024
Design by: Hamrad Gostar Asia Technology Development