Updating Cart...
  • Free transportation to the installation site
  • Free initial installation and setup
  • 2-year official warranty and 10 years of after-sales service
NextEnergy online three phase to three phase transformer-less UPS

The NextEnergy UPS, with a power range of 250 to 800 kVA, is an advanced three-phase uninterruptible power supply system designed for critical applications, utilizing transformerless online double-conversion technology (VFI-SS-111) with a three-level IGBT-based inverter, compliant with IEC EN 62040-3. This model delivers 97% efficiency in online mode (98.5% in ACTIVE ECO and 99% in STANDBY), a power factor of 1 (kW = kVA), and input harmonic distortion below 3%, effectively managing capacitive loads common in data centers without derating. The Efficiency Control System (ECS) optimizes NXE performance even at partial loads. The absence of a neutral connection requirement reduces power distribution costs in modern data centers. The Peak Shaving feature, with three operational modes, enables efficient management of high loads for energy savings. The Smart Capacity Test (SCT) feature allows battery capacity testing without a real load, facilitating intelligent maintenance and monitoring of battery and device performance. A 7-inch color touchscreen LCD clearly displays device parameters, status, and alarms. Full front access and top/bottom cable entry enable back-to-back installation, reducing the footprint to 0.68 square meters for the 250 kVA model. Parallel capability for up to 8 units with N+1 redundancy and Hot System Expansion (HSE) allows system expansion without downtime. USB, Dry Contacts, communication slots, and compatibility with PowerShield³ software facilitate network-based monitoring. Overload protection (up to 150% for 1 minute), overcurrent, temperature, and deep discharge safeguards ensure reliability. NextEnergy, with its focus on reducing Total Cost of Ownership (TCO) and sustainability, offers an innovative solution for IT business continuity.

Read more...
Topology
Online double-conversion
Power Range
250 - 800 kVA
Input/Output
3P : 3P (in:out)
Output Power Factor
P.F. = 1
Features:

Small footprint

Output power factor of 1

High efficiency up to 97% in Online mode

Color LCD display with touchscreen capability

Scalable up to 8 units in parallel

Full front access only

The NXE 2SW model is only available with input (SWIN) and output (SWOUT) switches.

Whats in the packing:
user manual iconUser Manual
rs232 serial cableRS232 Serial Cable
front access keyFront Door Access Key
hookHook for Device Transportation

Ask Me!

4.6 ★
  • Performance
  • Reliability
  • Features
  • Build Quality
  • Value for Price
(Generated by AI)
* Model:
* Power:
* Required backup time:
Other:
- +
 Purchase Steps

 Purchase Steps

 Product Originality

 Product Originality

UPS/Model
Select Model
UPS/Input
Nominal Voltage
380, 400, 415 VAC three-phase + N
Voltage Range
400 VAC ±20% @ full load
Frequency Range
40 to 70 Hz
Power Factor
0.99
Voltage Distortion (THDi)
< 3%
Inlet Type
terminal
UPS/Bypass
Voltage Range
380, 400, 415 VAC three-phase + N
Frequency Range
50 or 60 Hz, tolerance ±2% (selectable from ±1% to ±5%)
UPS/Output
Power
- select a model from top -
Nominal Voltage
380, 400, 415 VAC three-phase + N (selectable)
Voltage Variation
static variation ±1%, dynamic variation: ±5% in 10 ms
Frequency Range
50 or 60 Hz (selectable), stability during battery operation 0.05%
Power Factor
1
Voltage Distortion (THDv)
< 1% with resistive linear load, < 3% with non-linear load
Outlet Type
terminal
Wave form
sinusoidal
Efficiency
up to 97% in online mode
UPS/Battery
Battery Type
external
Qty × Voltage
40 × 12 VDC = 480 VDC
UPS/Protections
Overload
- select a model from top -
Protections
over-current, short-circuit, over-voltage, under-voltage, over-temperature, excessive low battery
Alarms
line failure, battery low, over-load, fault conditions
UPS/Physical
Dimensions (W × D × H)
- select a model from top -
Weight
- select a model from top -
UPS/Environment
Working Temperature
ambient: min 0 °C, max 40 °C, recommended for battery life: 20 to 25 °C
Working Humidity
max 95% non-condensing
Altitude Level
1000 m @ nominal power (Derating 1% power for every 100 m above 1000 m, max 6000 m)
Noise Level
max 74 dBA @ 1 m
UPS/Others
Communications
USB, Dry contacts, 2 slots for communications interface
Standards
European directives: LV 2014/35/EU low voltage Directive EMC 2014/30/EU electromagnetic compatibility Directive Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant Classification in accordance with IEC 62040-3 (Voltage frequency Independent) VFI - SS - 111

What is the power capacity range of the NextEnergy NXE UPS?
The NextEnergy NXE uninterruptible power supply offers a scalable power range from 250 kVA to 800 kVA in a single unit. This flexibility allows businesses to tailor their power solutions to specific needs, ensuring efficient energy management.
Can the NextEnergy NXE UPS operate in high ambient temperatures?
Yes, the NextEnergy NXE UPS is designed to operate in ambient temperatures up to 40°C without derating. This capability reduces the need for extensive cooling systems, leading to cost savings and increased reliability in various environments.
Home Products Downloads Call Now Your Quote