iDialog Rack UPS

  • Unavailable
idialog rack offline ups, 600 to 1200 VA

Topology: Offline
Power Range: 600 to 1200 VA
Input/Output: 1:1
Installation Type: Rackmount
Isolation: Transformer-less
Battery: Only Internal
Rackmount installation
Completely silent operation (0 dBA noise)
Suitable for PBX and VOIP systems
Easy installation (Plug & Play)
Auto start after mains return
Monitoring via network feature (1)
In general, the structure of this UPS is similar to the iDialog UPS in terms of technology, but it has two important differences; The design of the UPS case to be placed in the rack has been changed and the possibility of monitoring under the network has been added to it. Similar to the iDialog, the fanless special design results in a completely silent performance. Three standard sockets and two IEC output sockets for connecting consumers and an emergency terminal are installed in the back panel of the UPS. A USB port and an RS-232 serial port are provided for connecting the UPS to the PowerShield3 monitoring software or network monitoring box; This software can be used for monitoring UPS and automatic shutdown command of computer (local or network computers) connected to UPS.

Click for more information...

The energy required by the consumers connected to this UPS in the absence of power is provided by converting the energy stored in its internal battery. The internal battery can be easily replaced and replaced. Installation and commissioning of this UPS does not require much technical knowledge and the end user can start the UPS using the guide in the package.
(1) UPS monitoring under TCP/IP protocol requires NetMan 204 module and under Modbus/Jbus protocol requires MultiCOM 302 module with Communication Card Adapter box.
Zener UPS iDialog Rack rear view
IDialog Rack UPS is suitable for home and office use. The selling price of this UPS varies depending on the model and power requested. Please contact the sales department of Zener Engineering Company to find out the inventory, receive the price list and purchase the various capabilities of this UPS.
Collapse All
Expand All
File Name Volume Update
An Adobe Acrobat file iDialog Rack UPS english user manual
1.68 MB
An Adobe Acrobat file iDialog Rack UPS persian brochure
667.28 kB
Software and Accessories
UPS/ATS monitoring software
UPS/ATS remote monitoring
Modbus/Jbus protocol converter
Communication card adapter
Technical Specification
UPS Model
Input Spec.
Nominal Input Voltage 220, 230, 240 VAC single phase
Input Voltage Range 230 VAC -25% to +20%
Input Frequency Range 50 or 60 Hz with automatic selection
Inlet Direct wire
Output Spec.
Output Power - select a model from top -
Nominal Output Voltage 230 VAC single phase
Output Voltage Range AC mode: 230 VAC -20% to +25%, Inverter mode: 230 VAC ±10%
Output Frequency Range Inverter mode: 50 or 60 Hz (tolerance ±1%)
Output Wave form Pseudo sinusoidal
Transfer Time 2 to 6 ms typical
Outlet 3 × Schuko + 2 × IEC 320 C13
Battery Spec.
Type of Battery Only internal battery
No. × Voltage n/a
Recharging Time 6 to 8 hours
Overload AC mode: Load > 110% automatic shutdown after 5 minutes, Load > 120% shuts down immediately
Inverter mode: Load > 110% automatic shutdown after 5 seconds, Load > 120% shuts down immediately
Protections Excessive low battery, over-voltage, short-circuit
Alarms Line failure, battery low, over-load, fault conditions
Physical Spec.
Dimensions (W × D × H) - select a model from top -
Weight - select a model from top -
Environmental Conditions
Working Temperature Ambient: min 0 °C, max 40 °C, Recommended for battery life: 20 to 25 °C
Working Humidity max 95% non-condensing
Altitude Level 1000 m @ nominal power (Derating 1% power for every 100 m above 1000 m, max 6000 m)
Noise Level 0 dBA @ 1 m
Other Features
Communications USB, RS-232
Standards European directives: L V 2014/35/EU low voltage Directive EMC 2014/30/EU electromagnetic compatibility
Directive Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant
Ask about this product

Sales and Marketing Department

Ready to register your purchase requests.
+98 919 468 3960
Zener engineering company (PJS), founded in 1981 is among the most experienced companies in the power and electronics field in Iran. We offer a wide range of products in the field of generating electric power including online, offline and line-interactive UPS both single and three-phase from home and office to medical and industrial applications, sealed lead acid batteries, automatic transfer switch (ATS), monitoring systems, environmental sensors and related accessories. Zener Eng. Co. provides optimal technical support in order to create the best possible customer satisfactory regarding the uninterrupted function of its equipment. This is achieved using over 60 trained personnel. Our colleagues in sales and marketing department and after sales services department are trained to give our valued customers consultation in finding the most suitable products for their need, design and execution of uninterrupted electrical systems while providing special solutions. In addition to manufacturing single and three-phase UPS, sealed lead acid batteries both with Zener brand, Zener engineering company is official and exclusive agent for Riello UPS (from Italy), Ablerex UPS (from Taiwan), Rocket and Newmax batteries (from South Korea), Interberg batteries (from Spain) and Starway batteries (from China).
All rights reserved
Design by: Hamrad Gostar Asia Technology Development