iPlug UPS

  • Unavailable
iplug offline ups, 600 to 800 VA

zener ups iplug
Summary
Topology: Offline
Power Range: 600 to 800 VA
Input/Output: 1:1
Installation Type: Desktop
Isolation: Transformer-less
Battery: Only Internal
Features
Small and ergonomic design
5 outlets for battery support
3 outlets for power surge protection
Easy installation (Plug & Play)
Starts automatically after mains return
Easy internal battery replacement
Originality Guarantee
Guarantee Terms
Support & Service
Estimation of required power
iPlug UPS is ideal for home electrical and electronic consumers and small office systems. Ergonomic and compact design makes it possible to place UPS anywhere. The internal stabilizer with a wide range of performance in this UPS with proper regulation of output in the event of network power fluctuations, has increased the efficiency of the system. In the event of a power outage, the inverter converts the energy stored in a built-in battery into a UPS (7 AH in 600 VA and 9 AH in 800 VA) and supplies power to the connected loads to the system. A USB port is provided for connecting UPS to PowerShield3 monitoring software; This software can be used to monitor UPS and send automatic shutdown command to computer connected to UPS.

Click for more information...

Replacing the internal battery is easy by opening the cover under the device. There are 6 IEC standard sockets and 2 sockets in this UPS, three of which only protect against power fluctuations, and the rest of the outputs, in addition to protecting loads from fluctuations, provide power to connected consumers in the event of a power outage. Installation and commissioning of this UPS does not require much technical knowledge and the end user can start the UPS using the guide in the package.
Zener UPS iPlug Zener UPS iPlug
IPlug UPS is suitable for home and office use. The selling price of this UPS varies depending on the model and power requested. Please contact the sales department of Zener Engineering Company to find out the inventory, receive the price list and purchase the various capabilities of this UPS.
Downloads
Collapse All
Expand All
File Name Volume Update
An Adobe Acrobat file iPlug UPS english user manual
1.68 MB
2021-01-20
An Adobe Acrobat file iPlug UPS persian brochure
684.31 kB
2021-01-20
Software and Accessories
PowerShield3 UPS and ATS monitoring software
PowerShield3 Monitoring Soft.
UPS/ATS monitoring software
Technical Specification
UPS
UPS Model
Input Spec.
Nominal Input Voltage 220, 230, 240 VAC single phase
Input Voltage Range 230 VAC -25% to +20%
Input Frequency Range 50 or 60 Hz with automatic selection
Inlet Direct wire
Output Spec.
Output Power - select a model from top -
Nominal Output Voltage 230 VAC single phase
Output Voltage Range AC mode: 230 VAC -25% to +20%, Inverter mode: 230 VAC ±10%
Output Frequency Range Inverter mode: 50 or 60 Hz (tolerance ±1%)
Output Wave form Pseudo sinusoidal
Transfer Time 2 to 6 ms typical
Outlet 6 × Schuko + 2 × IEC 320 C13
Battery Spec.
Type of Battery - select a model from top -
No. × Voltage 1 × 12 VDC = 12 VDC
Recharging Time 6 to 8 hours
Protections
Overload AC mode: Load > 110% automatic shutdown after 5 minutes, Load > 120% shuts down immediately
Inverter mode: Load > 110% automatic shutdown after 5 seconds, Load > 120% shuts down immediately
Protections Excessive low battery, over-voltage, short-circuit
Alarms Line failure, battery low, over-load, fault conditions
Physical Spec.
Dimensions (W × D × H) 185 × 313 × 99 mm
Weight - select a model from top -
Environmental Conditions
Working Temperature Ambient: min 0 °C, max 40 °C, Recommended for battery life: 20 to 25 °C
Working Humidity max 95% non-condensing
Altitude Level 1000 m @ nominal power (Derating 1% power for every 100 m above 1000 m, max 6000 m)
Other Features
Communications USB
Standards European directives: L V 2014/35/EU low voltage Directive; EMC 2014/30/EU electromagnetic compatibility, Directive Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant
Ask about this product

Sales and Marketing Department

Ready to register your purchase requests.
Phone Call
+9821 66 72 3972 (Ext.1)
Whatsapp
+98 919 468 3960
Email us
sales@zenerco.com
Zener engineering company (PJS), founded in 1981 is among the most experienced companies in the power and electronics field in Iran. We offer a wide range of products in the field of generating electric power including online, offline and line-interactive UPS both single and three-phase from home and office to medical and industrial applications, sealed lead acid batteries, automatic transfer switch (ATS), monitoring systems, environmental sensors and related accessories. Zener Eng. Co. provides optimal technical support in order to create the best possible customer satisfactory regarding the uninterrupted function of its equipment. This is achieved using over 60 trained personnel. Our colleagues in sales and marketing department and after sales services department are trained to give our valued customers consultation in finding the most suitable products for their need, design and execution of uninterrupted electrical systems while providing special solutions. In addition to manufacturing single and three-phase UPS, sealed lead acid batteries both with Zener brand, Zener engineering company is official and exclusive agent for Riello UPS (from Italy), Ablerex UPS (from Taiwan), Rocket and Newmax batteries (from South Korea), Interberg batteries (from Spain) and Starway batteries (from China).
All rights reserved
COPYRIGHT © 2024
Design by: Hamrad Gostar Asia Technology Development

This site uses cookies. By click on "I agree" or continuing to browse our website, you agree to our website terms and privacy policy.

Click here for more information.

I agree