English
Persian 
Sales and Marketing Department
Ready to register your purchase requests.
Summary
| Topology: | Online Double Conversion | |
| Power Range: | 1 to 20 kVA | |
| Input/Output: | 1:1 3:1 | |
| Installation Type: | Desktop, Tower | |
| Isolation: | UPS + Isolation transformer (1) | |
| Battery: | Internal or External (2) |
Features
Wide input voltage and frequency range
0.9 output power factor
Programmable outlets (3)
Up to 4 UPS in parallel function (4)
With LCD display
Monitoring via network feature (5)
Zener Pro Tower UPS with Online topology provides high-reliability protection for sensitive consumers. Thanks to the use of an inverter with an updated design and equipped with an advanced digital signal processor (DSP), consumers are fed with full sinusoidal output, stabilized voltage and frequency without the slightest interruption. It is also possible to place the battery inside the UPS (up to 10kVA) or provide it with a high current charger (custom equipment) to charge external batteries. The back panel slot is used to install communication modules such as the NetAgent module. The RS-232 or USB communication port (if ordered) is intended for UPS connection and UPSilon 2000 and Emily 2 monitoring software.
Click for more information...
An emergency shut-off terminal (EPO) is installed on the back of the UPS that can be connected to the switchboard to cut off the UPS output immediately if necessary. The 1000, 2000 and 3000 capacities have two programmable outputs that can be automatically turned on or off by consumers connected to them in certain situations, such as power outages, overload, low battery voltage, and so on. Power expansion or increase of system reliability (Redundancy) in the capacities of 4.5 kVA and above is done by parallelizing the UPS easily and without any additional equipment. Dual input system is provided by default for 6kVA and 10 kVA capacities and 15 kVA and 20 kVA by default.
(1) It is possible to use the isolated output transformer inside the UPS for 6 kVA and 10 kVA capacities as custom equipment.
(2) It is possible to provide a battery box compatible with the body of the device, if ordered.
(3) Programmable outputs are available in 1000, 2000 and 3000 VA.
(4) Parallel capability is available in capacities of 4.5, 6, 8, 10, 15 and 20 kVA.
(5) UPS monitoring under TCP/IP protocol requires SNMP module and under Modbus/Jbus protocol requires RS-485 module.
Downloads
| File Name | Volume | Update |
|---|---|---|
 Zener Pro Tower UPS persian brochure |
675.83 kB | 2021-01-20 |